PESWiki.com -- Pure Energy Systems Wiki:
Finding and facilitating breakthrough clean energy technologies.
Directory:LEOGIM Hydraulic Motor
From PESWiki
<<HIGHLY IMPROBABLE>>
Pablo León Fernández claims a device that will produce clean energy at a cost significantly lower than conventional energy sources.
- "The unit produces 79.7 Megawatt-hours while only expending 1.5 MWh" -- home page
- Status
- Has not been verified. The astonishing claim seems inconsistent with the simplistic demo video that shows nothing resembling hydraulics. Apparently, no system prototypes have been built yet.
Contents |
About
| This is a new page! |
|---|
|
Official Website
Explanation of the Operation of the LEOGIM Motor
Oct. 8, 2007 email message from inventor, Pablo León Fernández, to Sterling D. Allan translated by AltaVista from Spanish, with some editorial clean-up
The hydraulic power that the LEOGIM Hydraulic Motor develops in its cycles pushes a million kilos without varying the volume of fluid, and it does so at speeds in excess of 30 meters per second.
The watertight zones (between cylinder and shirt), the exactitude of the times and flowed amount of that provides the box of levies to the valves, the watertightness of security made in the necks of the axis of the cylinder and the absence of temperature in its permanent operation, cause that Motor LEOGIM is more trustworthy than any other well-known motor. The scale of power that it develops and without consumption, makes it the greatest power source known to also produce electricity and in direct mechanical transmission for automobiles, trains, boats and others.
The simplicity of the LEOGIM motor makes more insurance. Its mechanics consist of only two parts, the development of the power in its interior and the mechanism that regulates the cycles on the outside. The interior lodged axis-motor cylinder in their shirt composes a movable piece - in their surface four zones are distributed that stay in their rotation between the space of the cylinder and the shirt watertight. These zones are full of hydraulic mineral oil without it varies his volume in the continuous succession of the cycles, inside each zone have been made mechanizations that allow the development of the cycles. The cylinder presents/displays in all its length the plane of work and the perpendicular forming a right angle, of the end of the perpendicular face the furrows extend that the mass of fluid extends in the rotation of the cycles, and a rectangular crack to lodge the band that suspends the zone with the shirt in its rotation. The shirt presents/displays the right angle opposed to the one of the cylinder and the orifices of entrance and exit of fluid. The small flights of the band that suspends the zones do not reduce effectiveness to the development of the cycles, since the necks of the axis assure the watertightness and therefore the degree internal pressure of the zones.
The external mechanism composes a box fixed to its housing outer and united by pulleys with the axis, lodges the disc tree that drives and maintains the valves open giving passage to the fluid during the development of the cycles until they finalize the route, moment that close and open those that expels the fluid that entered.
The development of the cycles takes place simultaneously in all the zones with the flowed injection of of the pumps (one by each zone), the flowed amount of that needs each zone that is injected to him in the volume of the mass that stores to develop the thrust horse power to a determined pressure, is of 0.5 % by each 70 kp/cm2. The rotation of the cylinder begins (moment of force) - in the point of the motor (equivalent to the point of the Otto motor) when agreeing the ends of the perpendicular planes with the ends of the fixed ones of the shirt, the planes of work and the perpendicular are inclined on their axis and with respect to the fixed plane of the shirt 47º, these are resembling, curve, to a rectangular figure (being wanted to seem to the hydraulic cylinder), the hydraulic pressure that affects all the directions, the vector moment of force, considered three-dimensional vector, affects the perpendicular plane that when inclined, shared in common being with the work plane, all the forces converge in him impelled the free plane of work and causing the turn of the cylinder. In the turn of the cylinder when separating the ends of the angles, the furrows act of pipes between the fixed and free faces until the end of the route of the cycles, moment that interrupts the entrance of fluid and the expulsion to the outside of the fluid takes place that them beginning, returning the pressure to its initial state to repeat the following cycles so on and.
The degree of pressure, the surface of the work plane and the number of zones will give the power that will develop each LEOGIM motor, that together with others will form the Unit able to replace in the present electrical power stations the power feeding and the turbines of the alternators, in continuous production, without consuming.
I will make a small demonstration unit when we find the investor to finance it. To them will will I show the scale models and laminae of drawing with my explanations.
- - - -
Aug. 11, 2007 email message from inventor, Pablo León Fernández, to Sterling D. Allan translated by AltaVista from Spanish, with some editorial clean-up.
The LEOGIM motor multiplies the energy that enters it, so that 1.5 MWh input produces 80 MWh output.
The summary of its essence, briefly is as follows. The space between area of piston of cylinder rigid of piston (as a syringe) and the fixed area of the cylinder that lodges it is full of hydraulic liquid, only precise that it is injected to him, for example, 0.5 % in volume stored to make push permanent to seventy kilos of force by each centimeter square that has the area, and in addition to do it in rotation permanent without to have needed to increase neither to vary volume of fluid, reason this one by which multiplies the energy that receives with the injection that elevates the pressure. All this is possible thanks to the cycles, essence of the invention.
The newness is: To have been able to apply the power of a rigid cylinder of piston to a constant movement in equal circles.
The rectangular figure that forms the rigid cylinder and the piston is separated diagonally forming each half a right angle. Half is practiced in the circumference of the shirt with its sine towards the outside, its area constitutes the rigid base of the hydraulic cylinder, other half is practiced in the axis-motor cylinder (lodged inside the shirt) with its sine towards the interior, its area constitutes the plane of free push (piston of the cylinder). In the perimeter of the cylinder the zones have practiced where the cycles are developed, these are distributed in equal parts, each zone forms watertightness with the shirt thanks to the band that surrounds it, although the cylinder is turning to more than 27 m/sg, the watertightness of each zone with the shirt is hermetic. Thus we have in each zone, the base of support of the fluid in the cylinder (classic of a machine) makes the bases of the rigid angles of the shirt, and the free base of push (that represents the piston of the cylinder) makes the plane of push of the angle of the cylinder. Therefore, in the two parts that we have diagonally sectioned of cylinder and piston, when being hermetic in the zone, its action of development of thrust horse power it does not vary. The right angle of the rigid cylinder is completed with the surface of the cylinder, and the free plane of push, that represents the area of the piston, completes the surface of the shirt. Four furrows practiced in each zone of the cylinder (one by each angle of the shirt) have the length of the cycle, begin in the free angle of movement (in the turn of the cylinder) and extend by the surface of the cylinder until the end of the opposed part of each zone, their mission is to maintain permanently connected the rigid angles of the shirt with the angle of the cylinder, act just as the pipes that unite the bulk injection pumps with the rigid cylinder of hydraulic piston (thanks to that the zone stays hermetic) Each one of these zones is full of hydraulic liquid, with a pressure in rest of the cycle (before beginning, in its deadlock) between 10/12 %, to this one will be united the one to him that will receive from the bulk injection pumps to develop the thrust horse power of each cycle in the cylinder.
Since we have observed, Motor LEOGIM each one of its four zones has become a powerful rigid cylinder of piston, but without being limited its push nor to need to increase the mass of hydraulic liquid fluid that the precise piston for their push, these zones are ready to initiate the movement of their pistons when increasing the pressure of the mass of liquid fluid interposed between the fixed base and the moving body of the right angles, crossing the cycle without needing to vary the volume of fluid.
Up to here nothing of the exposed thing admits doubts (the Hydrostatics establishes and leaves well clear as in the thrust horse power of a liquid fluid its transmission is practically instantaneous independently of the forms and measures of the faces that form the geometric figure that locks up the fluid, for example the pedal of brake of a car). Yet the exposed thing, we will understand that when in the zones we injected cubical centimeters more (the mineral oil relation of certain viscosity ISO 46, the mass is compressed 0.5 % by each 70 kp/cm2), with this small percentage we obtain the pressure wished between the fixed areas and movable and that the thrust horse power is directly proportional to the pressure degree and the surface in cm2 that it pushes. It does not admit doubts either. The cycles, begin when in each zone agree the fixed planes and movable forming a rectangle, this figure to the pushed being is disturbed with the displacement of the movable face when being distanced of the fixed ones. The furrows that maintain them united and hermetic - do not need to vary the volume of fluid while they make the passage that marks the zone to them, moment that reaches the deadlock of 2´75º, space in which closes the entrances of injected fluid and releases to the outside the percentage of fluid received in the development of the cycle, returning to his initial state, next it closes the exits of nozzles and indefinitely open to the injection mouths, repeating itself the cycles. Yet this that has been obtained.
The invention of a motor - of another only precise species that a smallest percentage of the power that it develops, taking advantage of all the rest to make limitless, clean electricity and to production cost - zero -. the thirty and seven machines that forms the Unit exposed in the Memory of the Web, give good account of their level, incomparable with no of the technological strategies that are continued developing (with investments of trillions) in power matters.
Hydraulic Motor LEOGIM makes possible that their result is - another concept thanks to that it works in rotation and this allows that it can develop to the thrust horse power between a rigid plane and another free one without varying the volume of fluid. During the distance that crosses the cycle, as the movable plane of the cylinder is separated of rigid of the shirt (to be turning with the cylinder) these remain official notices by the furrows of the cylinder that transmits the fluid to them and to be all of them hermetic ones within its zone.
We observed that the movable plane of push has been impelled by the volume of the liquid fluid that stores the zone and with no need to increase this volume and thus in all the route of the cycle, with the same power that a hydraulic cylinder of a machine that elevates tons, but LEOGIM has only needed to introduce 0´5 % by each 70 kp/cm2 which we elevate the pressure. That energy has used LEOGIM? 0.5 % by each 70 kp/cm2, that forces has pushed, the turn out to multiply the area of push by kp/cm2. Therefore, it is demonstrated that the received energy has multiplied it.
- - - -
Aug. 13, 2007 email message from inventor, Pablo León Fernández, to Sterling D. Allan translated by AltaVista from Spanish, with some editorial clean-up.
We are pending to obtain economic means to make the prototype of demonstration of the Motor Hihráulico LEOGIM. Our intention is, at least, to make a small model of production of 140 kw and to derive for its autonomy 13.5 kw. Estan prepared all the materials for the manufacture of the prototype, materials that we have found in different Countries, such as bulk injection pumps, I sweep perforated of alloyed carbon steel, alternators (of generating groups) and rest of materials that permitirián to make to us from this one 140 model of kw to 4 MW, depending on the money which we pruned to reunite, we will decide the production measurement.
If I have prototype working (the video is observed in the http://www.energia-electrica-leogim.info/video Web) and planes to tenth of millimeter, of "the floating" faucets of level with mounted sets that allow to visualize the opening passages and closes of the passage of the water, at the end of this Note writing, I expose a brief explanation, these planes if I can emviarselos if it considers it - the water hammer is suppressed for the first time in History, and what is more important that also the exact reading is made for the first time of the water consumption in the accountants, thus favoring to the cosumidores, eliminates of water that they inflict casualties the present floaters (when being made the closing by the interior of the body) and allow their plastic manufacture integramente (when eliminating formation of force in the interior of the body) what causes that lowers the price of fabricaciñón until a 80%).
Video
http://www.energia-electrica-leogim.info/video - [resembles a toilet flush mechanism]
The following is a translation by AltaVista with some editorial clean-up of an email received Aug. 11, 2007.
One shows the mounted model of 1.1/4"and can envision the opening passages and closing of the volume of water to the rain tank of supplying of a block of houses. The other sample the pieces that compose it, everything is finished to tenth of millimeter and the perfect operation of the prototype is observed in the Web: http://www.energia-electrica-leogim.info/video. Although Hydraulic Motor LEOGIM can seem paradoxical, is but clear and simple to make to try itself to mechanize and to mount a machine in single which the mechanical and hydraulic action takes part.
Patents
"NOTE: Another Patent of Invention (PCT) is totally proven the brief explanation of its high invention (it can be observed in Internet, with the word, GIMCAS)."
Profiles
Company: LEOGIM?
info here
Inventor: Pablo León Fernández
info here
Comments
A Joke
This seems to be a joke. The video does show - it doesn't only resemble - the swimmer used to limit and eventually close off water flowing into a toilet flushing mechanism. Sepp Hasslberger
Contact
Spanish-speaking Tool: http://world.altavista.com/ - translate to/from Spanish
Pablo León Fernández
DNI 26.399.627-C
Tno./Fax: 0034 973 75 16 53
Mancomunidad de Cataluña, 3
25.123 TORREFARRERA (Lérida)
email: info@energia-electrica-leogim.info
See also
- Other Directory listings
• Latest
• A-I
• J-R
• S-Z
• Tree
• News
- PESWiki home page
