PESWiki.com -- Pure Energy Systems Wiki:  Finding and facilitating breakthrough clean energy technologies.







    

Directory: Mechanical Opener for V-Gate Magnet Motor

From PESWiki

Jump to: navigation, search
Gif animation by Sterling Allan from the video screen grabs.
Gif animation by Sterling Allan from the video screen grabs.

by Sterling D. Allan
Pure Energy Systems News
November 18, 2010


A new video originally posted by Roobert33 (Robert H. Calloway) (now removed from his account) has become the rage among free energy enthusiasts. The open source design shows a V-gate magnet motor that supposedly is made functional (rotation maintained) by means of a mechanical method for moving the stator magnets in and out of the way of the gate ("re-gauging") so that the gate doesn't become a lock-up point that otherwise would stop the motion of the magnet motor.

There have been many demonstrations of transient movement along a V-arrangement of magnets, such that as the magnets are getting closer together (or further apart), forward motion is produced. But when the moving component gets to the end of the V, the advantage gained is counteracted by the opposite polarity that pushes in the opposite direction. Master replicator, CLaNZeR, illustrated this in a video back in August of 2008. He purportedly is now in process of replicating this new V-gate design.

This new design appears to overcome that in a circular arrangement of the V, by physically moving the stationary magnet (the V is in the rotor component) out of the way at the crucial moment. The component at the bottom is probably a magnet to give the rotor a push, just past the sticky point, keeping its distance except for at that moment. The mechanical action is a function of the kinetic momentum of the rotating part – similar to the action of the armature-brush-commutator assembly in an electric motor.

The video is certainly not skeptic proof. It doesn't include the original audio, so the possibility of blowing air being the cause of rotation can't be ruled out. We've seen another such video of a design, the Mecsdgp, that I'm nearly certain was via an air hose.

YouTube user, ZeroFossilFuel commented about this design in an email:

"Non linear acceleration. Several bursts of speed during the presentation. Disregard the joker off camera blowing across the wheel to keep it going whose shadow is seen off to the right every time the bursts occur and whose music masks the sound of his blowing, or possibly compressed air.
"Any magnet motor worth a damn will accelerate from a dead stop to speeds of self-destruction in very short order."

I don't see the shadow effect he's talking about. I agree that a plausible magnet motor design should rapidly accelerate to destruction without a load; but early working designs showing proof of principle to break the mental barriers are best illustrated in slow motion – if it is indeed a genuine effect.

Later today, Stefan Hartmann, moderator at Overunity.com wrote:

"I just received this message from Robert33...
"To: overunitydotcom
"Yes, It was a joke that I should not do! I apologize to you and all your friends who have lost time in commenting on .... The device had to operate the magnet inside a coil that I had in my shirt. Greeting, Robert"

That sounds like a diversion; like he wants to throw people off the scent. Magents could not have measurable effect from that distance, let alone, control.

On Nov. 20, Roobert33 posted a video of a magnet bearing arrangement.

Contents

Official Website

We offer this present page as a home page destination for this open source project. PESWiki is publicly editable, so feel free to correct, add relevant info and links, and to form new pages as required, such as a feature page about a replication.

Videos

V-Gate

Levitating

  • (YouTube / PESNetwork; Nov. 22, 2010)
  • (YouTube / Roobert33; Nov. 20, 2010)

Note the V-gate motor sitting in the background.

A common feedback that has come in on this is to the effect: "This is a homemade version of the magnetic toy you can buy at novelty shops. It has nothing to do with OU – it’s just a neat toy with an almost frictionless bearing."

On November 22, 2010 12:43 PM MST, Roobert33 wrote:

Tomorrow, I'll do as you said. I will put a plexiglass base and I will hold in my hand the object, so you can avoid doubt. In relation to the functioning of it, tomorrow I'll tell you how I put the poles etc. .. However, it is very simple!
  • (YouTube / Roobert33; Nov. 23, 2010)

Description

Levitation by means of opposing magnets.

Explanation to replicate: Needed: 4 speakers alike, a cylindrical piece of wood, wood based or plastic, mirror or glass. The magnets are removed from the speakers, two of them are left intact and for include it later in the compartment housing wooden tube. The other two speakers are broken in half to obtain two semi circles and go to paste on the base. At the wooden cylinder at one end tapering to form the tip of the nose and you go to paste a ball of steel. The mirror or glass molded in the shape that you want, it go to paste at the end of the base and remain at 90° on the base. The magnets must be placed on the base in the opposite direction, "to repel each other." At this point you just have to start the replication.....

Various electric experiments

Not related to the V-Gate, but interesting, and reflects Roobert33's curiosity.

  • (YouTube / Roobert33; December 08, 2010)

Instructions

Calloway told Steve Marshall that all the key components are magnets in attraction mode. He said the top bar could be iron, but it wouldn't have as much power.

On his page about this, Robert H. Calloway writes:

"The V Track motor will work by lifting the stator magnet above the sticky spot using a ramp cam mechanism. But the lever on the bottom plate raises a magnet by the same cam to assist in pulling at the start of the V magnets on the rotor wheel. The mechanical gate assembly is also supported by a spring which assists in lifting the gate. It is a complete attraction design. This gives the rotor wheel enough speed and power to overcome lifting the stator magnet. Notice the video at the upper left. This same principle can be applied to a PFI application. I have talked about this extensively on this website. There is even more advances to this design by using up to 4 stator magnets to help get through the sticky spot. It will be interesting to see how the laws of physics will explain this."

Photos

Parts
Image:Roobert33_V-gate-parts_400h.jpg Image:Roobert33_V-gate-side_jp70.jpg Image:Roobert33_V-gate-back_jp70.jpg

Replications

List here. None completed yet, that we know of, successful or otherwise.

Under Way

CLaNZeR

CLaNZeR is working on a replication.

See http://www.overunity.org.uk/showthread.php?t=527

On December 10, 2010 6:31 AM MST, CLaNZeR wrote:

Last weekend I spent cutting out coloured acrylic signs for my partners new shop sign, as well as sitting around the Airport for 9 hours trying to get home! This weekend will be taken up mostly by putting all the Xmas lights up outside before flying back upto work again for next week.

But will try and get the Relica finished, I need to add looser sliders and cut out the Cam and then can give it a go.


V-Ramp Quartz cam

  • Video showing new Cam cut out New Years Day (YouTube; January 23, 2011)

- - - -

Part 3

  • Quick update on V-Ramp Build. More in the New Year. (YouTube / Searcrhing2008; Dec. 29, 2010)

- - - -

Part 2

  • Mounted V-Track on the Rotor and made the uprights. Next the top bar and cam to be added. (YouTube / Searcrhing2008; Nov. 28, 2010)

- - - -

Part 1

  • Playing with [a linear version of] the Flexible V-Ramp before I mount it on a rotor. (YouTube / Searcrhing2008; Nov. 26, 2010)
  • Featured: Magnet Motors > V-Gates > Roobert33 >
    Roobert33's V-gate magnet motor for real? - Just when he was about to report on his finishing replicating Roobert33's design, CLaNZeR's website is closed "until further notice", and his replication videos have been made private. It turns out that the inventor is Robert H. Calloway, who says it has been running continuously. Rotation data posted. (PESN; December 27, 2010)

Laurent

Laurent is using a set-up he had for a Calloway motor replication, to replicate this present design. See his description of his replication launch as posted at Overunity.com on Nov. 7, 2010.

In the News

  • Robert said that this prototype would run endlessly if he let it, and that he sold his prototype to someone. He is now working on a gravity motor design. -- Sterling D. Allan; October 1, 2012
  • Featured: Magnet Motors > V-Gates > Roobert33 >
    Roobert33's V-gate magnet motor for real? - Just when he was about to report on his finishing replicating Roobert33's design, CLaNZeR's website is closed "until further notice", and his replication videos have been made private. It turns out that the inventor is Robert H. Calloway, who says it has been running continuously. Rotation data posted. (PESN; December 27, 2010)
  • Featured: Magnet Motors > V-Gates >
    Mechanical Opener for V-Gate Magnet Motor - A video originally posed by Roobert33 shows a V-gate magnet motor that supposedly is made functional (rotation maintained) by means of a mechanical method for moving the stator magnets in and out of the way of the gate ("re-gauging") so that the gate doesn't become a lock-up point that otherwise would stop the motion of the magnet motor. (PESWiki; November 18 2010)

Forums

Comments

Feel free to enter your comment below.

Seems Plausible

On November 19, 2010 3:07 PM MST, John Earle wrote:

Any force that can be controlled (commutated) by a lesser force can be made in to a motor. Magnets are just one way. Another is just plain old springs! That’s right, but few would think anything so simple could work. While this V gate magnet motor could be a scam, what I said is true and I heard the spring story from a reliable witness, related to the one that did it years ago.

Related Designs

jsngeorge423

  • "This subject has always fassinated me and although I know it is completly impossible I enjoy designing machines that explain the theory. This machine uses two magnetic V gates and a cam for jumping the so called "sticky spot". Obviously the device could never work but it would make an interesting desk toy. For more info about my work please visit http://www.jkgdesign.co.uk" (YouTube/ jsngeorge423; November 29, 2009)

Soukup

  • George Soukup's V-Track Rotary Magnet Motor - German inventor presents what appears to embody the V-track magnet accelleration model into rotating motion -- something that many have unsuccessfully attempted. What is not clear is whether his model achieves accelleration, or even constant speed. Can it handle a load?

Calloway




Contact

Steve Marshall

As of Dec. 27, 2010, Steve, who resides in Los Angeles, said he has dropped everything to work on this.

phone: +1-424-634-9963

email: marshalloptix@gmail.com

See also

MAGNET MOTORS FOOTER

LEADING (including legendary status)

- Other Open Source Projects
- Open Source News
- PESWiki main index
- PES Network Inc.

Personal tools

Departments
Sponsored Links

Support
Toolbox